SYSCON STARTERP0 addressOffset = 0x204

The STARTERP0 register enables the selected pin interrupts for wake-up from deep-sleep mode and power-down modes.

Note: Also enable the corresponding interrupts in the NVIC. See NVIC Connection of interrupt sources to the NVIC.
Table 1. SYSCON registerName = STARTERP0 addressOffset = 0x204
Bit Symbol Value Description Reset value
0 PINT0   GPIO pin interrupt 0 wake-up 0
    0 Disabled  
    1 Enabled  
1 PINT1   GPIO pin interrupt 1 wake-up 0
    0 Disabled  
    1 Enabled  
2 PINT2   GPIO pin interrupt 2 wake-up 0
    0 Disabled  
    1 Enabled  
3 PINT3   GPIO pin interrupt 3 wake-up 0
    0 Disabled  
    1 Enabled  
4 PINT4   GPIO pin interrupt 4 wake-up 0
    0 Disabled  
    1 Enabled  
5 PINT5   GPIO pin interrupt 5 wake-up 0
    0 Disabled  
    1 Enabled  
6 PINT6   GPIO pin interrupt 6 wake-up 0
    0 Disabled  
    1 Enabled  
7 PINT7   GPIO pin interrupt 7 wake-up 0
    0 Disabled  
    1 Enabled  
31:8 -   Reserved -

-->