SYSCON EXTTRACECMD addressOffset = 0x0FC

This register works in conjunction with the MTB master register to start and stop tracing.

Table 1. SYSCON registerName = EXTTRACECMD addressOffset = 0x0FC
Bit Symbol Description Reset value
0 START Trace start command. Writing a one to this bit sets the TSTART signal to the MTB to HIGH and starts tracing if the TSTARTEN bit in the MTB master register is set to one as well. 0
1 STOP Trace stop command. Writing a one to this bit sets the TSTOP signal in the MTB to HIGH and stops tracing if the TSTOPEN bit in the MTB master register is set to one as well. 0
31:2 - Reserved 0

-->