|Registers / SCT Register description|
If UNIFY = 1 in the CONFIG register, only the _L bits are used.
If UNIFY = 0 in the CONFIG register, this register can be written to as two registers STOPT_L and STOP_H. Both the L and H registers can be read or written individually or in a single 32-bit read or write operation.
|5:0||STOPMSK_L||If bit n is one, event n sets the STOP_L bit in the CTRL register (event 0 = bit 0, event 1 = bit 1, event 5 = bit 5).||0|
|21:16||STOPMSK_H||If bit n is one, event n sets the STOP_H bit in the CTRL register (event 0 = bit 16, event 1 = bit 17, event 5 = bit 21).||0|
© NXP N.V. 2014. All rights reserved.