NVIC IPR0 addressOffset = 0x400

The IPR0 register controls the priority of four peripheral interrupts. Each interrupt can have one of 4 priorities, where 0 is the highest priority.

Table 1. NVIC registerName = IPR0 addressOffset = 0x400
Bit Symbol Description
5:0 - These bits ignore writes, and read as 0.
7:6 IP_SPI0 Interrupt Priority. 0 = highest priority. 3 = lowest priority.
13:8 - These bits ignore writes, and read as 0.
15:14 IP_SPI1 Interrupt Priority. 0 = highest priority. 3 = lowest priority.
21:16 - These bits ignore writes, and read as 0.
23:22 - Reserved.
29:24 - These bits ignore writes, and read as 0.
31:30 IP_UART0 Interrupt Priority. 0 = highest priority. 3 = lowest priority.

-->