|Registers / MRT Register description|
The timer register holds the current timer value. This register is read-only.
Holds the current timer value of the down-counter. The initial value of the TIMERn register is loaded as IVALUE - 1 from the INTVALn register either at the end of the time interval or immediately in the following cases:
INTVALn register is updated in the idle state.
INTVALn register is updated with LOAD = 1.
When the timer is in idle state, reading this bit fields returns -1 (0x00FF FFFF).
© NXP N.V. 2014. All rights reserved.