|ISP-IAP API / IAP|
This command makes flash write/erase operation a two step process.
|Command||Prepare sector(s) for write operation|
|Input||Command code: 50_
Param0: Start Sector Number
Param1: End Sector Number (should be greater than or equal to start sector number).
|Status code||CMD_SUCCESS |
|Description||This command must be executed before executing "Copy RAM to flash" or "Erase Sector(s)" command. Successful execution of the "Copy RAM to flash" or "Erase Sector(s)" command causes relevant sectors to be protected again. The boot sector can not be prepared by this command. To prepare a single sector use the same "Start" and "End" sector numbers.|
© NXP N.V. 2014. All rights reserved.